Taxanaha Tuubada Dabacsan ee LN2
Warbixinta Kooban ee Badeecada:
- Taxanaha Tuubada Dabacsan ee LN2: Noocyo dhammaystiran oo tuubooyin dabacsan ah oo loogu talagalay wareejinta nitrogen dareere ah oo wax ku ool ah oo ammaan ah.
- Tuubooyinkan waxaa lagu yaqaanaa dabacsanaantooda, cimri dhererkooda, iyo sifooyinka waxqabadka sare leh, waxaana soo saara xaruntayada wax soo saarka ee hormuudka ka ah.
- Waxaan mudnaanta siinnaa qanacsanaanta macaamiisha waxaanan dammaanad qaadnaa alaabada tayada sare leh oo ay taageerayaan adeeg heer sare ah.
Sharaxaadda Badeecada:
I. Naqshad Kala Duwan oo Dabacsan:
- Taxanaha Tuubada Dabacsan ee LN2 wuxuu bixiyaa xulasho ballaaran oo tuubooyin ah oo ku habboon codsiyada kala duwan ee wareejinta nitrogen dareeraha ah.
- Tuubooyinkan waxaa loo sameeyay inay noqdaan kuwo aad u dabacsan, taasoo u oggolaanaysa dhaqdhaqaaq fudud iyo rakibid aan dhib lahayn oo ku saabsan qaabab kala duwan.
II. Waara iyo Kalsooni Sare:
- Tuubooyinka dabacsan ee LN2 oo laga sameeyay agab tayo sare leh ayaa loo sameeyay inay u adkeystaan heerkulka xad-dhaafka ah iyo xaaladaha shaqada ee adag.
- Iyagoo leh iska caabin aad u fiican oo ku aaddan xirashada, ilmada, iyo walbahaarka farsamada, waxay bixiyaan cimri adeeg oo dheer, iyagoo yareynaya kharashka waqtiga shaqada iyo dayactirka.
III. Tallaabooyinka Badbaadada ee La Kordhiyay:
- Taxanahayaga Tuubada Dabacsan ee LN2 wuxuu ku daraa astaamo badbaado oo dheeraad ah si loo hubiyo wareejinta nitrogen dareere ah oo sugan.
- Tuubooyinkan waxaa ku qalabaysan qalab aan daadan karin iyo lakabyo la xoojiyay si looga hortago daadan ama dhaawaca, iyagoo ilaalinaya shaqaalaha iyo deegaanka.
IV. Waxtarka Socodka LN2 ee ugu Fiican:
- Tuubooyinkan waxaa loogu talagalay gudaha siman, waxayna yareeyaan is jiidjiidka iyo hoos u dhaca cadaadiska, taasoo sahlaysa socodka LN2 oo hufan oo joogto ah.
- Dhaqdhaqaaqa socodka oo la xoojiyay wuxuu keenaa isticmaalka tamarta oo yaraada iyo waxqabadka guud ee nidaamka oo la wanaajiyo.
V. Habaynta iyo La-qabsiga:
- Waxaan fahamsanahay shuruudaha gaarka ah ee warshadaha kala duwan, waana sababta aan u bixinno ikhtiyaarro la beddeli karo oo loogu talagalay Taxanaha Tuubada Dabacsan ee LN2.
- Macaamiishu waxay ka dooran karaan dherer kala duwan, dhexroor, iyo isku xidhyo dhammaad leh si ay ugu habboonaadaan baahiyahooda gaarka ah ee codsiga.
VI. Xarunta Wax Soo Saarka ee Horseysa:
- Taxanaha Tuubada Dabacsan ee LN2 waxaa lagu soo saaray xarunteena casriga ah, iyadoo lagu qalabeeyay mashiinno iyo tiknoolajiyad casri ah.
- Iyada oo leh shaqaale xirfad sare leh, habraacyo xakameyn tayo oo adag, iyo habab wax soo saar oo hufan, waxaan si joogto ah u bixinnaa badeecooyin heer sare ah.
Gunaanadkii, Taxanaha Tuubada Dabacsan ee LN2 wuxuu bixiyaa xal hufan oo kala duwan oo loogu talagalay wareejinta badbaadada leh ee nitrogen dareere ah. Iyada oo leh dabacsanaantooda, cimri dhererkooda, iyo tallaabooyinka badbaadada ee la xoojiyay, tuubooyinkan waxaa loo sameeyay inay daboolaan baahiyaha kala duwan ee codsiyada kala duwan. Iyagoo dooranaya Taxanaha Tuubada Dabacsan ee LN2, macaamiishu waxay filan karaan waxqabad heer sare ah, wax soo saar la xoojiyay, iyo wareejin nitrogen dareere ah oo la isku halleyn karo hawlgalladooda.
Fiidiyowga
Tuubooyinka dahaaran ee faakuumka
Tuubbo faakiyuum ah oo lagu dahaadhay faakiyuum (tuubbo faakiyuum ah), oo ah Tuubbo Jaakadaysan oo Faakiyuum ah, oo ah beddel ku habboon dahaadhka tuubooyinka caadiga ah. Marka la barbardhigo dahaadhka tuubooyinka caadiga ah, qiimaha daadinta kulaylka ee VIP waa 0.05 ~ 0.035 jeer oo keliya dahaadhka tuubooyinka caadiga ah. Waxay si weyn u badbaadisaa tamarta iyo kharashka macaamiisha.
Taxanaha wax soo saarka ee Tuubada Dahaaran ee Faakuumka, Tuubada Dahaaran ee Faakuumka, Valve-ka Dahaaran ee Faakuumka, iyo Kala-soocidda Wajiga ee Shirkadda Qalabka HL Cryogenic, oo soo martay taxane daaweyn farsamo oo aad u adag, ayaa loo isticmaalaa wareejinta oksijiinta dareeraha ah, nitrogen dareere ah, argon dareere ah, haydarojiin dareere ah, helium dareere ah, LEG iyo LNG, alaabadan waxaa loo adeegaa qalabka dahaaran ee fayuumka (tusaale ahaan taangiga dahaaran, dewar iyo sanduuqa qabow iwm.) warshadaha kala-soocidda hawada, gaasaska, duulista hawada, elektarooniga, superconductor, jajabyada, farmashiyaha, isbitaalka, bangi-biyoodka, cuntada & cabitaanka, isu-geynta otomaatiga, caagga, injineernimada kiimikada ee wax soo saarka cusub, birta & birta, iyo cilmi-baarista sayniska iwm.
Afar Nooc oo Isku Xiran
Si loo kordhiyo baahiyaha kala duwan ee macaamiisha, waxaa badanaa jira afar nooc oo isku xiran oo loogu talagalay Tuubada Dabacsan ee VI. Saddexda nooc ee isku xidhka ee ugu horreeya waxay khuseeyaan oo keliya jagooyinka isku xidhka ee u dhexeeya Tuubooyinka Dabacsan ee VI. Nooca isku xidhka ee dunta leh guud ahaan waxaa loo isticmaalaa oo keliya isku xidhka Tuubada VI ee qalabka iyo haanta kaydinta.
Marka Tuubada Dabacsan ee VI ay ku xidho qalabka, haanta kaydinta iyo wixii la mid ah, isku-xidhka isku xidhka waxaa loo habayn karaa iyadoo loo eegayo shuruudaha macaamiisha.
Baaxadda Codsiga
| VNooca Isku xirka Bayonet ee acuum oo leh Qaboojiyeyaal | Nooca Isku xirka Bayonet-ka faakuumka oo leh Flanges iyo Bolts | Nooca Isku xirka Alxanka leh | Nooca Isku xirka Isku-xirka Maqaarka | |
| Nooca Isku xirka | Qaboojiyaha | Flanges iyo Bolts | Alxanka | Mawduuca |
| Nooca dahaarka ee kala-goysyada | Faakiyuum | Faakiyuum | Perlite ama faakiyuum | Qalabka Dahaaran ee Duubista |
| Daawaynta Dahaaran ee Goobta | No | No | Haa, perlite-ka ayaa lagu buuxiyaa ama faakiyuum ka soo saara gacmaha dahaaran ee kala-goysyada. | Haa |
| Ballaca Magacaaban ee Tuubada Gudaha | DN10(3/8")~DN25(1") | DN10(3/8")~DN80(3") | DN10(3/8")~DN150(6") | DN10(3/8")~DN25(1") |
| Cadaadiska Naqshadeynta | ≤8 baar | ≤16 baar | ≤40 baar | ≤16 baar |
| Rakibaadda | Fudud | Fudud | Alxanka | Fudud |
| Heerkulka Naqshadeynta | -196℃~ 90℃ (LH2 & LHe：-270℃ ~ 90℃) | |||
| Dhererka | ≥ 1 mitir/xabbo | |||
| Alaab | Bir aan miridh lahayn oo 300 Taxane ah | |||
| Dhexdhexaad ah | LN2, LOX, LAR, LHe, LH2, LNG | |||
Daboolka Ilaalinta
VI Tuubada dabacsan waxay ku lug leedahay laba nooc oo dabool ilaalin dibadeed ah, oo ay ku jiraan gobolka aan lahayn dabool ilaalin ah, waxaa jira saddex xaaladood oo gaarsiin ah guud ahaan.
| Iyada oo aan lahayn Daboolka Ilaalinta | |
| Daboolka Ilaalinta ee Tidcan | |
| Daboolka Ilaalada Gaashaaman |  |
Baaxadda Alaabta ee Sahayda
| Badeecada | Faahfaahinta | Xidhiidhka Faakuumka Bayonet-ka oo leh Qaboojiyeyaal | Xidhiidhka Bayonet-ka Faakiyuumka oo leh Flanges iyo Bolts | Xidhiidhka dahaaran ee Alxanka | Xidhiidhka Dunta |
| Tuubo dabacsan oo faakuum ah | DN8 | HAA | HAA | HAA | HAA |
| DN15 | HAA | HAA | HAA | HAA | |
| DN20 | HAA | HAA | HAA | HAA | |
| DN25 | HAA | HAA | HAA | HAA | |
| DN32 | / | HAA | HAA | / | |
| DN40 | / | HAA | HAA | / | |
| DN50 | / | HAA | HAA | / | |
| DN65 | / | HAA | HAA | / | |
| DN80 | / | HAA | HAA | / | |
| DN100 | / | / | HAA | / | |
| DN125 | / | / | HAA | / | |
| DN150 | / | / | HAA | / |
Astaamaha Farsamada
| Heerkulka Naqshadeynta | -196~90℃ （LHe：-270~90℃） |
| Heerkulka Deegaanka | -50~90℃ |
| Heerka Daadinta Faakuumka | ≤1 * 10-10Pa*m3/S |
| Heerka faakuumka ka dib Dammaanadda | ≤0.1 Pa |
| Habka dahaaran | Dahaarka Lakabyada Badan ee Faakiyuumka Sare leh. |
| Dhejiyayaal iyo Helayaal | Haa |
| Cadaadiska Tijaabada | 1.15 Waqti Cadaadiska Naqshadeynta |
| Dhexdhexaad ah | LO2, LN2, LAr, LH2, LHe, LUG, LNG |
Tuubbo dabacsan oo firfircoon oo aan degganayn oo faakuum ah
Tuubada Dabacsan ee Faakuumka lagu dahaadhay (VI) waxaa loo qaybin karaa Tuubada Dabacsan ee Firfircoon iyo Taagnida ah ee VI.
lTuubada VI ee taagan ayaa si buuxda loogu dhammeeyay warshadda wax soo saarka.
lNidaamka Dynamic VI waxaa la siiyaa xaalad faakiyuum oo deggan iyadoo la adeegsanayo bamgareyn joogto ah oo nidaamka bamka faakiyuumka ah goobta, daaweynta faakiyuumkana mar dambe laguma sameyn doono warshadda. Inta kale ee isku-dubaridka iyo daaweynta habka ayaa weli ku jirta warshadda wax soo saarka. Markaa, Diirinta VJ ee Dynamic waxay u baahan tahay in lagu qalabeeyo Nidaamka Bamka Faakiyuumka.
| Faakuumka firfircoon ee dahaaran Tuubo dabacsan | Tuubbo dabacsan oo faakuumka ah oo taagan | |
| Hordhac | Heerka faakuumka ee lakabka isku xidhka faakuumka ayaa si joogto ah loola socdaa, bamka faakuumkana si toos ah ayaa loo xakameeyaa si loo furo oo loo xidho, si loo hubiyo xasilloonida iyo waxtarka heerka faakuumka. | VJTuubo dabacsans dhammaystir shaqada dahaarka faakuumka ee warshadda wax soo saarka. |
| Faa'iidooyinka | Haynta faakuumka ayaa aad u deggan, asal ahaan waxay meesha ka saartaa dayactirka faakuumka mustaqbalka shaqada. | Maalgashi dhaqaale badan leh iyo rakibid fudud oo goobta ah |
| Nooca Isku xirka Bayonet-ka faakuumka oo leh Qaboojiyeyaal | La isticmaali karo | La isticmaali karo |
| Nooca Isku xirka Bayonet-ka faakuumka oo leh Flanges iyo Bolts | La isticmaali karo | La isticmaali karo |
| Nooca Isku xirka Alxanka leh | La isticmaali karo | La isticmaali karo |
| Nooca Isku xirka Isku-xirka Maqaarka | La isticmaali karo | La isticmaali karo |
Faakuumka firfircoon ee dahaaran ee dabacsan HsaliidNidaamka: Waxay ka kooban yihiin tuubooyin dabacsan oo faakuum ah, tuubooyin boodbood iyo Nidaamka Bamka Faakuumka (oo ay ku jiraan bambooyinka faakuumka, waalka solenoid-ka iyo cabbirrada faakuumka). Si fudud loogu rakibay qol yar. Dhererka Tuubada dabacsan ee Faakuumka ee hal-dabool leh waxaa loo habeyn karaa iyadoo loo eegayo shuruudaha macaamiisha.
2. QEEXIDDA IYO MOODELKA
HL-HX-X-000-00-X
Summada
Qalabka HL Cryogenic
Sharaxaad
HD: Tuubada VI ee firfircoon
HS: Tuubo taagan VI
Nooca Isku xirka
W: Nooca Isku xirka Alxanka leh
B: Nooca Isku xirka Bayonet-ka faakuumka oo leh Qaboojiyeyaal
F: Nooca Isku xirka Bayonet-ka faakuumka oo leh Flanges iyo boolal
T: Nooca Isku xirka Isku-xirka Mawduuca
Ballaca Magacaaban ee Tuubada Gudaha
010: DN10
…
080: DN80
…
150: DN150
Cadaadiska Naqshadeynta
08: 8bar
16: 16 bar
25: 25 bar
32: 32 bar
40: 40bar
Waxyaabaha Tuubada Gudaha
A: SS304
B: SS304L
C: SS316
D: SS316L
E: Kale
3.1 Tuubbo dabacsan oo aan la dahaadhin oo faakuumka ah oo taagan
| Model | Isku xirkaNooca | Ballaca Magacaaban ee Tuubada Gudaha | Cadaadiska Naqshadeynta | AlaabTuubada Gudaha | Heerka Caadiga ah | Faallo |
| HLHSB01008X | Nooca Isku xirka Faakuumka Bayonet oo leh Qaboojiyeyaal loogu talagalay Tuubbo dabacsan oo faakuumka ah oo taagan | DN10, 3/8" | 8 baar
| Bir aan miridh lahayn oo 300 Taxane ah | ASME B31.3 | X: Qalabka Tuubada Gudaha. A waa 304, B waa 304L, C waa 316, D waa 316L, E waa mid kale. |
| HLHSB01508X | DN15, 1/2" | |||||
| HLHSB02008X | DN20, 3/4" | |||||
| HLHSB02508X | DN25, 1" |
Dhexroorka Magacaaban ee Tuubada Gudaha:Lagu taliyay ≤ DN25 ama 1". Ama wuxuu doortaa Nooca Isku xirka Bayonet-ka Faakuumka oo leh Flanges iyo Bolts (laga bilaabo DN10, 3/8" ilaa DN80, 3"), Nooca Isku xirka Alxanka leh (laga bilaabo DN10, 3/8" ilaa DN150, 6")
Dhexroorka Magacaaban ee Tuubada Dibadda:Waxaa ku taliyay Heerka Ganacsiga ee Qalabka HL Cryogenic. Waxa kale oo la soo saari karaa iyadoo loo eegayo shuruudaha macaamiisha.
Cadaadiska Naqshadeynta: Lagu taliyay ≤ 8 bar. Ama dooro Nooca Isku xirka Bayonet-ka Faakuumka oo leh Flanges iyo Bolts (≤16 bar), Nooca Isku xirka Alxanka leh (≤40 bar)
Waxyaabaha Tuubada Dibadda ah: Iyada oo aan lahayn shuruudo gaar ah, walxaha tuubada gudaha iyo tuubada dibadda ayaa la dooran doonaa isku mid.
| Model | Isku xirkaNooca | Ballaca Magacaaban ee Tuubada Gudaha | Cadaadiska Naqshadeynta | AlaabTuubada Gudaha | Heerka Caadiga ah | Faallo |
| HLHSF01000X | Nooca Isku xirka Bayonet-ka Faakuumka oo leh Flanges iyo Bolts loogu talagalay Tuubbo dabacsan oo faakuumka ah oo taagan | DN10, 3/8" | 8 ~ 16 baar | Bir aan miridh lahayn oo 300 Taxane ah | ASME B31.3 | 00: Cadaadiska Naqshadeynta. 08 waa 8bar, 16 waa 16 bar.
X: Qalabka Tuubada Gudaha. A waa 304, B waa 304L, C waa 316, D waa 316L, E waa mid kale. |
| HLHSF01500X | DN15, 1/2" | |||||
| HLHSF02000X | DN20, 3/4" | |||||
| HLHSF02500X | DN25, 1" | |||||
| HLHSF03200X | DN32, 1-1/4" | |||||
| HLHSF04000X | DN40, 1-1/2" | |||||
| HLHSF05000X | DN50, 2" | |||||
| HLHSF06500X | DN65, 2-1/2" | |||||
| HLHSF08000X | DN80, 3" |
Dhexroorka Magacaaban ee Tuubada Gudaha:Lagu taliyay ≤ DN80 ama 3". Ama wuxuu doortaa Nooca Isku xirka Alxanka leh (laga bilaabo DN10, 3/8" ilaa DN150, 6"), Nooca Isku xirka Bayonet-ka Faakuumka oo leh Qaboojiyeyaal (laga bilaabo DN10, 3/8" ilaa DN25, 1").
Dhexroorka Magacaaban ee Tuubada Dibadda:Waxaa ku taliyay Heerka Ganacsiga ee Qalabka HL Cryogenic. Waxa kale oo la soo saari karaa iyadoo loo eegayo shuruudaha macaamiisha.
Cadaadiska Naqshadeynta: Lagu taliyay ≤ 16 bar. Ama dooro Nooca Isku xirka Alxanka leh (≤40 bar).
Waxyaabaha Tuubada Dibadda ah: Iyada oo aan lahayn shuruudo gaar ah, walxaha tuubada gudaha iyo tuubada dibadda ayaa la dooran doonaa isku mid.
| Model | Isku xirkaNooca | Ballaca Magacaaban ee Tuubada Gudaha | Cadaadiska Naqshadeynta | AlaabTuubada Gudaha | Heerka Caadiga ah | Faallo |
| HLHSW01000X | Nooca Isku xirka Alxanka leh ee Tuubada Dabacsan ee Faakuumka ee Ma-guurtada ah | DN10, 3/8" | 8 ~ 40 baar | Bir aan miridh lahayn oo 300 Taxane ah | ASME B31.3 | 00: Cadaadiska Naqshadeynta 08 waa 8bar, 16 waa 16 bar, iyo 25, 32, 40.
X: Qalabka Tuubada Gudaha. A waa 304, B waa 304L, C waa 316, D waa 316L, E waa mid kale. |
| HLHSW01500X | DN15, 1/2" | |||||
| HLHSW02000X | DN20, 3/4" | |||||
| HLHSW02500X | DN25, 1" | |||||
| HLHSW03200X | DN32, 1-1/4" | |||||
| HLHSW04000X | DN40, 1-1/2" | |||||
| HLHSW05000X | DN50, 2" | |||||
| HLHSW06500X | DN65, 2-1/2" | |||||
| HLHSW08000X | DN80, 3" | |||||
| HLHSW10000X | DN100, 4" | |||||
| HLHSW12500X | DN125, 5" | |||||
| HLHSW15000X | DN150, 6" |
Dhexroorka Magacaaban ee Tuubada Dibadda:Waxaa ku taliyay Heerka Ganacsiga ee Qalabka HL Cryogenic. Waxa kale oo la soo saari karaa iyadoo loo eegayo shuruudaha macaamiisha.
Waxyaabaha Tuubada Dibadda ah: Iyada oo aan lahayn shuruudo gaar ah, walxaha tuubada gudaha iyo tuubada dibadda ayaa la dooran doonaa isku mid.
| Model | Isku xirkaNooca | Ballaca Magacaaban ee Tuubada Gudaha | Cadaadiska Naqshadeynta | AlaabTuubada Gudaha | Heerka Caadiga ah | Faallo |
| HLHST01000X | Nooca Isku xirka Faakuumka Bayonet oo leh Qaboojiyeyaal loogu talagalay Tuubbo dabacsan oo faakuumka ah oo taagan | DN10, 3/8" | 8 ~ 16 baar | Bir aan miridh lahayn oo 300 Taxane ah | ASME B31.3 | 00: Cadaadiska Naqshadeynta. 08 waa 8bar, 16 waa 16 bar.
X: Qalabka Tuubada Gudaha. A waa 304, B waa 304L, C waa 316, D waa 316L, E waa mid kale. |
| HLHSB01500X | DN15, 1/2" | |||||
| HLHSB02000X | DN20, 3/4" | |||||
| HLHSB02500X | DN25, 1" |
Dhexroorka Magacaaban ee Tuubada Gudaha:Lagu taliyay ≤ DN25 ama 1". Ama wuxuu doortaa Nooca Isku xirka Bayonet-ka Faakuumka oo leh Flanges iyo Bolts (laga bilaabo DN10, 3/8" ilaa DN80, 3"), Nooca Isku xirka Alxanka leh (laga bilaabo DN10, 3/8" ilaa DN150, 6")
Dhexroorka Magacaaban ee Tuubada Dibadda:Waxaa ku taliyay Heerka Ganacsiga ee Qalabka HL Cryogenic. Waxa kale oo la soo saari karaa iyadoo loo eegayo shuruudaha macaamiisha.
Cadaadiska Naqshadeynta: Lagu taliyay ≤ 16 bar. Ama dooro Nooca Isku xirka Alxanka leh (≤40 bar)
Waxyaabaha Tuubada Dibadda ah: Iyada oo aan lahayn shuruudo gaar ah, walxaha tuubada gudaha iyo tuubada dibadda ayaa la dooran doonaa isku mid.
3.2 Nidaamka Tuubooyinka Dahaaran ee Faakuumka Firfircoon
| Model | Isku xirkaNooca | Ballaca Magacaaban ee Tuubada Gudaha | Cadaadiska Naqshadeynta | AlaabTuubada Gudaha | Heerka Caadiga ah | Faallo |
| HLHDB01008X | Nooca Isku xirka Faakuumka Bayonet oo leh Qaboojiyeyaal loogu talagalay Tuubbo Dabacsan oo Faakuum ah oo Firfircoon | DN10, 3/8" | 8 baar
| Bir aan miridh lahayn oo 300 Taxane ah | ASME B31.3 | X:Qalabka Tuubada Gudaha. A waa 304, B waa 304L, C waa 316, D waa 316L, E waa mid kale. |
| HLHDB01508X | DN15, 1/2" | |||||
| HLHDB02008X | DN20, 3/4" | |||||
| HLHDB02508X | DN25, 1" |
Dhexroorka Magacaaban ee Tuubada Gudaha:Lagu taliyay ≤ DN25 ama 1". Ama wuxuu doortaa Nooca Isku xirka Bayonet-ka Faakuumka oo leh Flanges iyo Bolts (laga bilaabo DN10, 3/8" ilaa DN80, 3"), Nooca Isku xirka Alxanka leh (laga bilaabo DN10, 3/8" ilaa DN150, 6")
Dhexroorka Magacaaban ee Tuubada Dibadda:Waxaa ku taliyay Heerka Ganacsiga ee Qalabka HL Cryogenic. Waxa kale oo la soo saari karaa iyadoo loo eegayo shuruudaha macaamiisha.
Cadaadiska Naqshadeynta: Lagu taliyay ≤ 8 bar. Ama dooro Nooca Isku xirka Bayonet-ka Faakuumka oo leh Flanges iyo Bolts (≤16 bar), Nooca Isku xirka Alxanka leh (≤40 bar)
Waxyaabaha Tuubada Dibadda ah: Iyada oo aan lahayn shuruudo gaar ah, walxaha tuubada gudaha iyo tuubada dibadda ayaa la dooran doonaa isku mid.
Xaaladda Korontada:Goobtu waxay u baahan tahay inay koronto siiso bambooyinka faakuumka oo ay wargeliso HL Cryogenic Equipment macluumaadka korontada maxalliga ah (Voltage iyo Hertz).
| Model | Isku xirkaNooca | Ballaca Magacaaban ee Tuubada Gudaha | Cadaadiska Naqshadeynta | AlaabTuubada Gudaha | Heerka Caadiga ah | Faallo |
| HLHDF01000X | Nooca Isku xirka Bayonet-ka Faakuumka oo leh Flanges iyo Bolts loogu talagalay Tuubbo dabacsan oo faakuumka firfircoon | DN10, 3/8" | 8 ~ 16 baar | Bir aan miridh lahayn oo 300 Taxane ah | ASME B31.3 | 00: Cadaadiska Naqshadeynta. 08 waa 8bar, 16 waa 16 bar.
X: Qalabka Tuubada Gudaha. A waa 304, B waa 304L, C waa 316, D waa 316L, E waa mid kale. |
| HLHDF01500X | DN15, 1/2" | |||||
| HLHDF02000X | DN20, 3/4" | |||||
| HLHDF02500X | DN25, 1" | |||||
| HLHDF03200X | DN32, 1-1/4" | |||||
| HLHDF04000X | DN40, 1-1/2" | |||||
| HLHDF05000X | DN50, 2" | |||||
| HLHDF06500X | DN65, 2-1/2" | |||||
| HLHDF08000X | DN80, 3" |
Dhexroorka Magacaaban ee Tuubada Gudaha:Lagu taliyay ≤ DN80 ama 3". Ama wuxuu doortaa Nooca Isku xirka Alxanka leh (laga bilaabo DN10, 3/8" ilaa DN150, 6"), Nooca Isku xirka Bayonet-ka Faakuumka oo leh Qaboojiyeyaal (laga bilaabo DN10, 3/8" ilaa DN25, 1").
Dhexroorka Magacaaban ee Tuubada Dibadda:Waxaa ku taliyay Heerka Ganacsiga ee Qalabka HL Cryogenic. Waxa kale oo la soo saari karaa iyadoo loo eegayo shuruudaha macaamiisha.
Cadaadiska Naqshadeynta: Lagu taliyay ≤ 16 bar. Ama dooro Nooca Isku xirka Alxanka leh (≤40 bar).
Waxyaabaha Tuubada Dibadda ah: Iyada oo aan lahayn shuruudo gaar ah, walxaha tuubada gudaha iyo tuubada dibadda ayaa la dooran doonaa isku mid.
Xaaladda Korontada:Goobtu waxay u baahan tahay inay koronto siiso bambooyinka faakuumka oo ay wargeliso HL Cryogenic Equipment macluumaadka korontada maxalliga ah (Voltage iyo Hertz).
| Model | Isku xirkaNooca | Ballaca Magacaaban ee Tuubada Gudaha | Cadaadiska Naqshadeynta | AlaabTuubada Gudaha | Heerka Caadiga ah | Faallo |
| HLHDW01000X | Nooca Isku xirka Alxanka leh ee Tuubada Dabacsan ee Faakuumka ee Firfircoon | DN10, 3/8" | 8 ~ 40 baar | Bir aan miridh lahayn 304, 304L, 316, 316L | ASME B31.3 | 00: Cadaadiska Naqshadeynta 08 waa 8bar, 16 waa 16 bar, iyo 25, 32, 40. .
X: Qalabka Tuubada Gudaha. A waa 304, B waa 304L, C waa 316, D waa 316L, E waa mid kale. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Dhexroorka Magacaaban ee Tuubada Dibadda:Waxaa ku taliyay Heerka Ganacsiga ee Qalabka HL Cryogenic. Waxa kale oo la soo saari karaa iyadoo loo eegayo shuruudaha macaamiisha.
Waxyaabaha Tuubada Dibadda ah: Iyada oo aan lahayn shuruudo gaar ah, walxaha tuubada gudaha iyo tuubada dibadda ayaa la dooran doonaa isku mid.
Xaaladda Korontada:Goobtu waxay u baahan tahay inay koronto siiso bambooyinka faakuumka oo ay wargeliso HL Cryogenic Equipment macluumaadka korontada maxalliga ah (Voltage iyo Hertz).
| Model | Isku xirkaNooca | Ballaca Magacaaban ee Tuubada Gudaha | Cadaadiska Naqshadeynta | AlaabTuubada Gudaha | Heerka Caadiga ah | Faallo |
| HLHDT01000X | Nooca Isku xirka Faakuumka Bayonet oo leh Qaboojiyeyaal loogu talagalay Tuubbo Dabacsan oo Faakuum ah oo Firfircoon | DN10, 3/8" | 8 ~ 16 baar | Bir aan miridh lahayn oo 300 Taxane ah | ASME B31.3 | 00: Cadaadiska Naqshadeynta. 08 waa 8bar, 16 waa 16 bar.
X: Qalabka Tuubada Gudaha. A waa 304, B waa 304L, C waa 316, D waa 316L, E waa mid kale. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Dhexroorka Magacaaban ee Tuubada Gudaha:Lagu taliyay ≤ DN25 ama 1". Ama wuxuu doortaa Nooca Isku xirka Bayonet-ka Faakuumka oo leh Flanges iyo Bolts (laga bilaabo DN10, 3/8" ilaa DN80, 3"), Nooca Isku xirka Alxanka leh (laga bilaabo DN10, 3/8" ilaa DN150, 6")
Dhexroorka Magacaaban ee Tuubada Dibadda:Waxaa ku taliyay Heerka Ganacsiga ee Qalabka HL Cryogenic. Waxa kale oo la soo saari karaa iyadoo loo eegayo shuruudaha macaamiisha.
Cadaadiska Naqshadeynta: Lagu taliyay ≤ 16 baar. Ama dooro, Nooca Isku xirka Alxanka leh (≤40 baar)
Waxyaabaha Tuubada Dibadda ah: Iyada oo aan lahayn shuruudo gaar ah, walxaha tuubada gudaha iyo tuubada dibadda ayaa la dooran doonaa isku mid.
Xaaladda Korontada:Goobtu waxay u baahan tahay inay koronto siiso bambooyinka faakuumka oo ay wargeliso HL Cryogenic Equipment macluumaadka korontada maxalliga ah (Voltage iyo Hertz).
