F065
Dhexroorka Magacaaban ee Tuubada Dibadda:
- Waxaa ku taliyay Heerka Ganacsiga ee Qalabka HL Cryogenic. Waxa kale oo la soo saari karaa iyadoo loo eegayo shuruudaha macaamiisha.
- Cadaadiska Naqshadeynta:
- Lagu taliyay ≤ 16 bar. Ama dooro Nooca Isku xirka Alxanka leh (≤40 bar).
- Waxyaabaha Tuubada Dibadda ah
Iyada oo aan lahayn shuruudo gaar ah, walxaha tuubada gudaha iyo tuubada dibadda ayaa la dooran doonaa isku mid.
3.1.3 Nooca Isku xirka Alxanka leh
odel
Isku xirka
Nooca
Ballaca Magacaaban ee Tuubada Gudaha
Cadaadiska Naqshadeynta
Alaab
Tuubada Gudaha
Heerka Caadiga ah
Faallo
W010
00X
Nooca Isku xirka Alxanka leh ee Tuubada Dabacsan ee Faakuumka ee Ma-guurtada ah
DN10, 3/8"
8 ~ 40 baar
Bir aan miridh lahayn oo 300 Taxane ah
ASME B31.3
| V | DN20, 3/4" | DN25, 1" | Dhexroorka Magacaaban ee Tuubada Dibadda: | |
| Cadaadiska Naqshadeynta | Qalabka Tuubada Gudaha. | A waa 304, | DN40, 1-1/2" | C waa 316, |
| D waa 316L, | HLHS | HLHS | W015 | 00X |
| DN15, 1/2" | No | No | HLHS | Cadaadiska Naqshadeynta |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32, 1-1/4" | 00X | DN32, 1-1/4" |
| HLHS | HLHS | HLHS | DN40, 1-1/2" | HLHS |
| Lagu taliyay ≤ DN25 ama 1". Ama wuxuu doortaa Nooca Isku xirka Bayonet-ka Faakuumka oo leh Flanges iyo Bolts (laga bilaabo DN10, 3/8" ilaa DN80, 3"), Nooca Isku xirka Alxanka leh (laga bilaabo DN10, 3/8" ilaa DN150, 6") | 00X | |||
| DN50, 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| Heerka Caadiga ah | LN2HLHS2W080 | |||
00X
DN80, 3"
| LHSW100 | |
| 00X | |
| DN100, 4" |  |
LHSW125
| 00X | DN125, 5" | LHSW150 | 00X | DN150, 6" | Dhexroorka Magacaaban ee Tuubada Dibadda: |
| Waxaa ku taliyay Heerka Ganacsiga ee Qalabka HL Cryogenic. Waxa kale oo la soo saari karaa iyadoo loo eegayo shuruudaha macaamiisha. | Waxyaabaha Tuubada Dibadda ah | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" |
| Nooca | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Heerka Caadiga ah | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| DN10, 3/8" | DN25, 1" | DN25, 1" | DN25, 1" | DN25, 1" | |
| Cadaadiska Naqshadeynta. | / | DN25, 1" | DN25, 1" | / | |
| Qalabka Tuubada Gudaha. | / | DN25, 1" | DN25, 1" | / | |
| C waa 316, | / | DN25, 1" | DN25, 1" | / | |
| HLHS | / | DN25, 1" | DN25, 1" | / | |
| DN15, 1/2" | / | DN25, 1" | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / | |
| HLHS | / | / | DN25, 1" | / | |
| 00X | / | / | DN25, 1" | / |
Dhexroorka Magacaaban ee Tuubada Gudaha:
| Lagu taliyay ≤ DN25 ama 1". Ama wuxuu doortaa Nooca Isku xirka Bayonet-ka Faakuumka oo leh Flanges iyo Bolts (laga bilaabo DN10, 3/8" ilaa DN80, 3"), Nooca Isku xirka Alxanka leh (laga bilaabo DN10, 3/8" ilaa DN150, 6") | Dhexroorka Magacaaban ee Tuubada Dibadda: |
| Waxaa ku taliyay Heerka Ganacsiga ee Qalabka HL Cryogenic. Waxa kale oo la soo saari karaa iyadoo loo eegayo shuruudaha macaamiisha. | Cadaadiska Naqshadeynta: |
| Lagu taliyay ≤ 16 bar. Ama dooro Nooca Isku xirka Alxanka leh (≤40 bar) | Waxyaabaha Tuubada Dibadda ahIyada oo aan lahayn shuruudo gaar ah, walxaha tuubada gudaha iyo tuubada dibadda ayaa la dooran doonaa isku mid.3.2 Nidaamka Tuubooyinka Dahaaran ee Faakuumka Firfircoon3/S |
| 3.2.1 Nooca Isku xirka Faakuumka Bayonet oo leh Qaboojiyeyaal | odel |
| Isku xirka | Nooca |
| Ballaca Magacaaban ee Tuubada Gudaha | Cadaadiska Naqshadeynta |
| Alaab | Tuubada Gudaha |
| Heerka Caadiga ah | Faallo |
HDB01008
Nooca Isku xirka Faakuumka Bayonet oo leh Qaboojiyeyaal loogu talagalay Tuubbo Dabacsan oo Faakuum ah oo Firfircoon
lDN10, 3/8"
l8 baar
| Bir aan miridh lahayn oo 300 Taxane ah C waa 316, | Qalabka Tuubada Gudaha. | |
| A waa 304, | B waa 304L,C waa 316,D waa 316L, | |
| E waa mid kale. | HLH | DB01508 |
| DN15, 1/2" | Cadaadiska Naqshadeynta: | Cadaadiska Naqshadeynta: |
| DN20, 3/4" | Cadaadiska Naqshadeynta: | Cadaadiska Naqshadeynta: |
| DN25, 1" | Cadaadiska Naqshadeynta: | Cadaadiska Naqshadeynta: |
| Dhexroorka Magacaaban ee Tuubada Dibadda: | Cadaadiska Naqshadeynta: | Cadaadiska Naqshadeynta: |
Lagu taliyay ≤ 8 bar. Ama dooro Nooca Isku xirka Bayonet-ka Faakuumka oo leh Flanges iyo Bolts (≤16 bar), Nooca Isku xirka Alxanka leh (≤40 bar)Waxyaabaha Tuubada Dibadda ahIyada oo aan lahayn shuruudo gaar ah, walxaha tuubada gudaha iyo tuubada dibadda ayaa la dooran doonaa isku mid.
Xaaladda Korontada:
HL-HX-X-Goobtu waxay u baahan tahay inay koronto siiso bambooyinka faakuumka oo ay wargeliso Qalabka HL Cryogenic Equipment macluumaadka korontada maxalliga ah (Voltage iyo Hertz).-00-X
3.2.2 Nooca Isku xirka Bayonet-ka Faakuumka oo leh Flanges iyo Bolts
odel
Isku xirka
Nooca
Ballaca Magacaaban ee Tuubada Gudaha
Cadaadiska Naqshadeynta
Alaab
Tuubada Gudaha
Heerka Caadiga ah
Faallo
Nominal Diameter of Inner Pipe
00X
8 ~ 16 baar
DN10, 3/8"
8 ~ 16 baar
Bir aan miridh lahayn oo 300 Taxane ah
Design Pressure
Cadaadiska Naqshadeynta.
08 waa 8bar,
16 waa 16 bar.
Qalabka Tuubada Gudaha.
A waa 304,
B waa 304L,
C waa 316,
D waa 316L,
E waa mid kale.
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | Taxanaha Kala-soocidda Wajiga ee Vacuum-ka ah | DN10, 3/8" | Armeeniyaan
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FaransiisDhexroorka Magacaaban ee Tuubada Dibadda:X | DN15, 1/2" | |||||
| FaransiisLagu taliyay ≤ 16 bar. Ama dooro Nooca Isku xirka Alxanka leh (≤40 bar).X | DN20, 3/4" | |||||
| FaransiisXaaladda Korontada:X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Icelandic
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| Faransiis08 waa 8bar,00X | iyo 25, 32, 40. | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FaransiisSamoan00X | DN15, 1/2" | |||||
| FaransiisSindhi00X | DN20, 3/4" | |||||
| FaransiisTajik00X | DN25, 1" | |||||
| FaransiisTayland00X | DN32, 1-1/4" | |||||
| FaransiisUzbekistan00X | DN40, 1-1/2" | |||||
| FaransiisXhosa00X | DN50, 2" | |||||
| FaransiisZulu00X | DN65, 2-1/2" | |||||
| FaransiisOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Xaaladda Korontada:
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10, 3/8" | DN10, 3/8" | Bir aan miridh lahayn oo 300 Taxane ah | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FaransiisDN15, 1/2"00X | DN15, 1/2" | |||||
| FaransiisDN20, 3/4"00X | DN20, 3/4" | |||||
| FaransiisDN25, 1"00X | DN25, 1" | |||||
| FaransiisW03200X | DN32, 1-1/4" | |||||
| FaransiisW04000X | DN40, 1-1/2" | |||||
| FaransiisW05000X | DN50, 2" | |||||
| FaransiisW06500X | DN65, 2-1/2" | |||||
| FaransiisW08000X | DN80, 3" | |||||
| HTuubada Jaakadda Faakuumka00X | DN100, 4" | |||||
| HShiinaha Liquid Socodka Ogsajiinta Waalka Nidaaminta00X | DN125, 5" | |||||
| HQiimaha jumlada Shiinaha Shiinaha ISO Standard Taangiga 2...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSNidaamka Bamka Faakuumka ee Firfircoon00X | Taxanaha Kala-soocidda Wajiga ee Vacuum-ka ah | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| FaransiisWhatsapp00X | DN15, 1/2" | |||||
| FaransiisWeChat00X | DN20, 3/4" | |||||
| FaransiisJarmal00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Giriig
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Deenish
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLLaoX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | Armeeniyaan
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHIstooniyaanX | DN15, 1/2" | |||||
| HLHFrisianX | DN20, 3/4" | |||||
| HLHGujaratiX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Icelandic
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLMalayalam00X | Maori | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDSamoan00X | DN15, 1/2" | |||||
| HLHDSindhi00X | DN20, 3/4" | |||||
| HLHDTajik00X | DN25, 1" | |||||
| HLHDTayland00X | DN32, 1-1/4" | |||||
| HLHDUzbekistan00X | DN40, 1-1/2" | |||||
| HLHDXhosa00X | DN50, 2" | |||||
| HLHDZulu00X | DN65, 2-1/2" | |||||
| HLHDOriya00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
